Commercial refrigeration · Reach-in service · virtual skills lab

It hums, it clicks,
and the box is warm.

The customer says the reach-in is warm and the back of it hums and clicks every few minutes. Watch a start attempt, unplug the unit and keep the plug in your control, then pull the relay and overload and read the windings on bare pins. A reading to ground and a 500 V insulation test settle it, and the close-out asks which reading condemns the compressor.

  • 20graded steps
  • ~15minutes
  • 80score to pass
Grounded compressor diagnosis virtual skills lab

The job

What you do in this lab

  1. Put on PPE, read the work order and read the box temperature before you touch anything.
  2. Take the grille off, slide the refrigeration sled out and watch the compressor try to start.
  3. Unplug the reach-in and keep the plug where you can see it.
  4. Pull the terminal cover, the start relay and the overload, then read C to R, C to S and R to S.
  5. Read C to ground, then confirm it with the megohmmeter at 500 V.
  6. Put the deck back together, leave the unit unplugged and record the job.

Skills practiced

What it builds

  • Cord-and-plug energy control
  • Compressor terminal identification
  • Winding resistance
  • Resistance to ground
  • Megohmmeter insulation test
  • Diagnosis and work order close-out

Every action is scored as you work. Wrong tools, skipped safety steps and wrong readings cost points, and the questions along the way ask why, not just what.

How to play

Browser or headset

In a browser

Open the lab on a laptop or desktop in Chrome, Edge or Safari. Look around with the mouse and click to act. On a touchscreen tablet the lab switches to touch controls. The lab is a large download, so give it a moment on the first load.

Open the lab

In VR

On a Meta Quest, open the Quest browser and go to titanlearning.com/vr/grounded-compressor. Choose Play it in your browser, then Open in VR inside the lab, then Enter VR in the tab that opens. Use the controllers, or put them down and point and pinch with your hands.

For schools

Train on labs like this every week

This lab is one of the virtual skills labs built into Titan Learning programs. Learners practice the work between lessons, and instructors see every attempt and score. A headset is optional.

Put this lab on your school’s website

Paste this into an HTML block on any page. It shows a small card with a play button. The lab opens in a full-screen player on your page and only downloads when someone presses play, so your page stays fast. Replace YOUR-SCHOOL with a short name for your school.

<div data-titan-sim="grounded-compressor" data-school="YOUR-SCHOOL"></div>
<p class="titan-credit">Commercial refrigeration virtual skills lab by <a href="https://www.titanlearning.com/vr/grounded-compressor/">Titan Learning</a></p>
<script src="https://www.titanlearning.com/vr/embed.js" async></script>